1. according to the actual requirements of gas stations and chemical plants, this compressor head is designed independently and manufactured by our company after a complete type test demonstration. it has the characteristics of compact structure, low noise, small vibration, energy saving and cost-effective. it can completely replace the similar imported brands.
2. the compressor shall be delivered in accordance with relevant national standards, with reference to gb / t3853-2017, gb / t7777-2003, gb / t4980-2003, jb / t8933-2008), each equipment shall undergo strict air tightness test before leaving the factory: water immersion test shall be adopted, and fluororubber gasket / o-ring shall be adopted at each joint, without any gas leakage; moreover, and it can work at temperatures above - 30 ℃, and at temperatures above - 65 ℃ and lower, it can be specially customized.
3. features of main parts:
cylinder body: after special chemical treatment, improve the surface accuracy, increase the wear resistance and prolong the use time;
valve plate ---- made of stainless steel, integrated structure, longer service life, lower exhaust temperature;
bearings ---- all add anti-oxidation, corrosion-resistant, high temperature resistant imported grease, making the bearing run longer.
piston ring and guide ring: the material is filled with polytetrafluoroethylene, with high temperature resistance and excellent self-lubricating performance;
4. main technical parameters:
model: vws-0.15/7
power: 1.5kw
speed: 920 r / min
inlet and outlet: rc3 / 4
cylinder diameter * quantity: φ 65 * 2
compression series: first compression
boundary dimension: 465 * 300 * 370mm
weight: 25kg